SONY 4K SXRD Home Theater Projector (VPLVW695ES)

$12,999.99

  • 1,800 Lumens Brightness
  • 4K Upscaling with Reality Creation
  • 350,000:1 Dynamic Contrast Ratio
  • 4K Motionflow
Save A BundleContact UsCan't Find What I Want

Description

 

VPLVW695ES

Size & Weight
Dimensions (W x H x D) 49.5 x 20.5 x 46.3 cm
Weight Approx. 31 lb (14 kg)
Display
Display System 4K SXRD panel, projection system
Display Resolution Computer signal input: Maximum display resolution: 1,920 x 1,080 dots (HDMI input only)/video signal input: 480/60p, 576/50p, 720/60p, 720/50p, 1080/60 i, 1080/50 i, 1 080/60p, 1080/50p, 1080/24p, 3840 x 216 0/24p, 3840 x 2160/25p, 3840 x 2160/30p, 3840 x 2160/50p, 3840 x 2160/60p, 4096 x 2160/24p, 4096 x 2160/25p, 4096 x 216 0/30p, 4096 x 2160/50p, 4096 x 2160/60p
Light source High-pressure mercury lamp, 280 W type
General Features
Contrast ratio 350,000:1 (Dynamic Contrast)
Effective display size 0.74" x 3
Effective pixels 26,542,080 (4096 x 2160 x 3) pixels
Projection lens shift Vertical: 85% -80% Horizontal: /-31%
Screen size 1,524 mm to 7,620 mm (60 in to 300 in)
Hardware
Projection lens zoom / focus Powered (Approx. x2.06)
Interface
Input and Output Terminals HDMI (2 INPUTS)1 - Digital RGB/Y Pb/Cb Pr/Cr, IR IN - Minijack, LAN - RJ45, 10Base-T/100BASE-TX, REMOTE - RS-232C, D-sub 9-pin (male), TRIGGER (2 INPUTS) - Minijack, DC 12 V Max. 100 mA, USB - DC 5 V, Max. 500 mA
Operating Conditions
Operating temperature / humidity 41 °F to 95 °F (5 °C to 35 °C)/35% to 85% (no condensation)
Storage temperature / humidity -4 °F to 140 °F (-20 °C to 60 °C)/10% to 90% (no condensation)
Power
Acoustic noise 26 dB
Power requirement AC 100 V to 240 V, 4.6 A to 2.0 A, 50/60 Hz
Power consumption 460 W
Video Features
Light Output 1,800 lm (Lamp mode: High)2
Color Light Output 1,800 lm (Lamp mode: High)2
Eco and energy saving
Power Consumption (Standby Mode) 0.4 W (when “Remote Start” is set to “Off”)
Power Consumption (Networked Standby Mode) – Terminals 1.0 W (LAN) (when “Remote Start” is set to “On”) When a LAN terminal is not connected, it goes into low power consumption mode (0.5 W).
Standby Mode Activated After about 10 Minutes

Additional information

Brand

Have A Question?

We are here to help. Use the contact form below and we will reply as soon as possible.